Chapter 3 Operation
66
Configuration
Rule unit
This function can allow user to select the unit of length for system.
There are three
options:
step
,
millimeter
, and
inch
.
Sleep mode
After the setting time,
system
will turn off the power of laser tube if there is still no
file being executed.
Auto run
This item has been deactivated.
Arc comp
Compensates laser output power while cutting an arc.
Position setup
Adjust X-Y axis
This
function
can allow
user to set the position of
[P1]
and
[P2]
. Please move
the carriage to the position that you want set for
[P1]
or
[P2]
. Then press
[Enter]
when the cursor is on the right side of
[Set as P1]
or
[Set as P2]
.
Focus Length
This
function
can c
hange focal length for auto focusing if you change the size of focus
lens.
Auto Focusing
Focusing the laser automatically. This function is the same with .
X-Y homing
Move the carriage to home, and reset the position of home
if the
carriage
loses
position. This function is the same with .
■
X loc. 600.000mm
Y loc. 500.000mm
Z loc. 0.000mm
data is OK!
Configuration
Position setup
■
Status
About SLC-M-C60M
Configuration
Position setup
Status
■
About SLC-M-C60M
Laser Tools &
Technics Corp.
SN:9810000
2008/12/5 Ver 8.08
