INSTRUCTION MANUAL
macnaught.com
INSTALLATION
1. Prior to mounting the hose reel, ensure that the supply line pressure does not exceed the maximum
working pressure of the hose reel.
2. Unpack and inspect reel for damage and completeness. Turn by hand to check for smooth operation.
3. You will need to purchase appropriate hardware for securing your new reel to the desired location.
4. Position reel on the floor, wall or celing and secure into place using the appropriate hardware.
5. If necessary, adjust spring tension on reel by adding or removing wraps of hose from spool, one wrap at
a time, until desired tension is obtained. Add wraps to increase or remove wraps to decrease tension.
6. Apply Teflon tape or pipe sealant to all threaded connections.
Note: Always hold on to the hose while it is rewinding.
ENCLOSED METAL HOSE REELS
Fitting bracket
(
fig1
)
1. Fix bracket A to the house reel
2. Attach the 6 screws, fixing them in sequence.
3. Apply the plastic plugs B in the free holes.
HOSE REEL INSTALLATION
MOUNTING POSITIONS