Top climate system
with LUBING Touch Controller
Copyright © Lubing System - All rights reserved
10
Procure spare parts via LUBING SYSTEM SRL.
The system starts automatically. The personnel must be informed of this. Before working on the system, it must be
switched off and secured against being switched on again.
2.7 Personal protective equipment
WARNING
Injury hazard due to incorrect spare parts!
Incorrect or faulty spare parts may cause damage, malfunctioning or total failure, and may also give rise
to safety hazards.
Use original spare parts only.
CAUTION
Danger due to contamination and/or leaking liquids.
Parts lying around can lead to tripping and/or falling and must be removed before the system is put into
operation.
Water may occasionally escape from the following system parts during operation of the system:
- Water occasionally escapes at the pressure relief valve of the pump unit or at the pressure relief of
individual compartments, especially when the system is switched off.
- Water with a temperature of more than 60°C may escape at the thermovalve.
It must be ensured that the escaping water can be drained off safely and does not cause dam- age due
to local water accumulation.
If liquids leak out due to damage, these must be removed immediately, otherwise they may cause the unit
to slip and/or fall.
IMPORTANT INFORMATION
If the system is switched off for special work such as maintenance and repair work, it must be secured
against being switched on again unexpectedly.
WARNING
Restart after power failure!
The system can restart automatically after a power failure.
CAUTION
Injury hazard from sharp edges!
Wear suitable protective clothing (incl. protective gloves).
CAUTION
Danger from hot surfaces!
Some system components can heat up to over 60°C during operation.
WARNING
Danger from aerosols and biological/microbiological substances!
Aerosols produced by the plant can potentially cause breathing difficulties. Especially after long periods
of standstill and increased temperatures, microorganisms can multiply and cause a hazard. Observe any
existing legal regulations.
To reduce the risk, ensure that the water quality is sufficient for hygienic operation and rinse the system
after long periods of inactivity.
WARNING
The following instructions must be observed for all work on the system:
–
Wear close-fitting protective work clothing and safety shoes.
– Use protective gloves if there is a risk of hand injuries.
– Wear protective goggles if there is a risk of eye injury.
– Do not wear rings, chains, watches, scarves or other objects that can get caught in the system
parts.
– Do not work with long, open hair, as this can get caught in driven system parts and lead to serious
injuries.
– Always wear a safety helmet when working under the system.
– Wear suitable hearing protection when reaching or exceeding the applicable limits fo the sound
pressure level.
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
lubingsystem.
com
