THDVDW1217 Adapter
(Sold Separately)
TH100200W 100/200mm
Adapter Plate
TH100200W 75/100mm
Plate
4Pl. Acorn Nuts
4Pl. Washers
4Pl. #10-24 x 1/2"
Carriage Bolts
Optional THDVDW1217
Hanging Equipment Mount
Optional THDVDW1217 Installation
Attach the THDVDW1217 to the TH100200W
75/100 VESA Plate or TH100200 Adapter Plate
with screws going through the adapter into
the back of the screen. The THDVDW1015 adapter
is trapped between the screen and the mounting plate.
Adding the THDVDW1217 may require longer
monitor attaching screws. 4mm, 5mm & 6mm
longer setscrews, hex nuts & washers
are provided with the THDVDW1217 mount.
Optional Height Adjustment
Optional Height Adjustment
The TH100200W 100/200mm Adapter Plate can be mounted
to the TH100200W 75/100mm Plate either above or below
the mount center line to allow for height adjustment
up or down up to 1-1/2".
Attach the TH100200W Adapter Plate with the desired
set of 100mm x 100mm square holes using the
#10-24 x 1/2" Carriage Bolts, Washers & Acorn Nuts.
Adjust the TH100200W Adapter Plate level with the
TH100200W 75/100mm Plate and tighten all four
Acorn Nuts
Protected under one or more of these U.S. Patent numbers: 3,291,432 3,559,942 3,724,798 DES.270,689 4,613,109 4,878,645 4,852,842 DES.309,5624,973,023 5,169,114 5,255,884 5,310,152 5,522,576 5,621,614 Re.35,677 DES.398,834 5,826,384 5,941,492 5,964,068 6,060,661 6,102,398 6,158,704 6,454,116B1 6,761,276B2 6,806,425B1
TH100200W INSTALLATION INSTRUCTIONS Page 3 of 3
©2013 Lucasey Manufacturing Corporation, Oakland, California www.lucasey.com
TH100200W Wall Mount Installation
TH100200W_Ins (5/13)
with Optional THDVDW1015 - Hanging Equipment Mount
