Airlie II Fan Installation Instructions
5 |
P a g e L D - A I R L I E I I - 5 2 L - X X X / 0 1
HANGING THE FAN
Pass the power supply wires (C) from the ceiling outlet box (B) through the center of the ceiling mounting
bracket (D). Install the ceiling mounting bracket (D) on the outlet box (B) with the mounting screws (F)
provided with the outlet box and washers (E) provided with fan.
Fig. 6
Lift the fan assembly onto the mounting bracket. Ensure the registration slot (A) of the hanger ball is
positioned on the stopper (B) of the mounting bracket (C) to prevent the fan from rotating when in
operation.
Fig.7
INSTALLING THE FAN
Blade attachment
1.
Remove the two screws (1) from the covering plate (2) on the
top of the motor housing, and remove the plate.
2.
Insert the blade (4) into the square slot of the motor.
3.
Secure the blade on the bracket by using 3 motor screws with
washer (3), ensuring they are tightened simultaneously.
4.
Once completed, repeat the process on the remaining blades.
5.
Replace the covering plate on top of the motor housing.
LIGHT KIT INSTALLATION
CAUTION
– To reduce the risk of electric shock,
disconnect the electrical supply circuit to the fan before
installing light kit. Ligth kit weight: 1.66 lb.
1.
Install the bulbs.
2.
Lift and attach the glass to the lamp base and
secure it by spring clips.
Fig. 6
Fig. 7
Fig. 8
Fig. 9
