Airfusion Climate Installation Instructions
5 |
P a g e
INSTALLING THE FAN
BLADE INSTALLATION
•
Insert the blade screws (4) through the blade bracket (3) and place on the underside of blade (2). (Fig. 5)
•
Place the blade gasket (5) on the topside of the blade. (Fig. 5)
•
Align the screws with the holes and secure the blade onto bottom of the fan motor (1). Ensure the screws
are tightened equally and evenly. Over tightening the screws can damage the blade (2). (Fig. 5)
•
Repeat the process for the remaining
blades.
•
Install the bottom cover
onto the motor shaft
by rotating it clockwise.
(Fig. 6)
LIGHT KIT (
sold separately
)
•
NOTE:
The light kit must be installed by a licensed electrician.
•
The light kit is
sold separately
. (
SKU# 210250, 210251,
210252, 210245, 210246, 210247, 210248, 210249
)
•
Remove the bottom cover from the motor shaft.
•
Remove the heat shrink tube from the connector. (Fig. 7)
•
For further instructions, please refer to the instructions
included with the light kit.
Fig. 7
Fig. 5
Fig. 6
