LONDO DC Fan Installation Instructions
6 |
P a g e
From mains supply to mounting bracket terminal block: (Fig. 5)
1.
Connect the live supply wire to the “L” terminal of the terminal block on the mounting bracket.
2.
Connect the neutral supply wire to “N” terminal of the terminal block on the mounting bracket.
3. Connect earth wire to the earth terminal of the terminal block on the mounting bracket.
From mounting bracket to receiver and motor:
(Fig. 5)
4. Click together the supply wires from the mounting bracket to the input of the DC motor receiver.
5. Click together the output wires of DC motor receiver to the input wires of the fan motor
via the quick
connector plugs.
6.
Connect the earth wires from the fan
motor to the single earthing terminal block “1” in the diagram.
Fig. 5
