LONDO DC Fan Installation Instructions
8 |
P a g e
•
Align the arrow mark (4) on the hook surface of the motor housing (5) up to the screws (2) of hanging
canopy (3). (Fig.9)
•
Finally attach the motor housing (5) to the mounting bracket, secure it by pushing the hooks of the
motor housing into the slot holes of the hanging canopy and turn it anti clockwise. (Fig.9)
INSTALLING THE FAN BLADE
BLADE ATTACHMENT (Fig.10)
1.
Before installing the blades, remove the blade screws with lockwashers from the bottom of fan motor.
2.
Orientate the blade Support plate and fan blade onto the fan assembly (Fig.10)
Mount the fan blade onto the fan assembly using three blade screws with lockwashers in step 1, (Fig.10).
Ensure all screws are tightened evenly to reduce the chance of warping or unbalancing.
Take care not to over tighten the screws, as this can damage the blades
Take note the correct side of the blades with the marking “THIS SIDE UP” faces the ceiling.
3. Repeat for the remaining Two fan blades and support plates.
To secure the three blade support plates and the fan blades to the fan assembly, tighten all screws with
lockwashers.
Fig. 9
