1. Drill the holes on the wall and hammer the anchors (16) into the holes.
2. Insert the screws(1) through the bracket (2), and secure the bracket on the wall via tightening the
screws (5)
3. Connect the mains supply wire to the light fitting using the terminal block (1) provided. Ensure that
the wires are secure and no bare wires are exposed.
4. Secure the terminal block (4) on the bracket (2).
5. Secure the lamp base (6) on the screws (1) via tightening the screw nuts (7)
6. Install the bulb (not include) on the lamp holder (10)
7. Secure the finial (15) on the lamp shape (13) via tightening the screw nut (14).
8. Secure the lamp shape (13) on the lamp shape cover (8) via tightening the screws (12) and nuts
(9).
TIPS
1. To avoid injury or damage to the fitting, ensure that power leads and screws are secure before
connection the power.
2. Handle the fitting and cover/shade with care to avoid breakage.
3. Turn OFF power and wear gloves when changing or cleaning bulbs.
4. Ensure that the fitting does not come in contact with corrosive chemicals, etc.
SPECIFICATIONS:
SKU #
MODEL #
RATED VOLTAGE
LAMP HOLDER
RATED WATTAGE
230903
LD-330WD-BK
220-240V
～
50Hz
E27
1x Max. 60W
230922
LD-500WD-BK
220-240V
～
50Hz
E27
1x Max. 60W
