Installation Instructions
1 |
P a g e v 1 . 0 ( 0 1 / 2 0 2 0 )
CANON 12V LED LIGHT – RECTANGULAR
SKU# 240802, 240803
Rated Voltage 12V AC
Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read and follow all
instructions carefully before assembly, installation and use of this product. Please keep instructions for future reference.
NOTE: This installation instruction applies to the 12V side of the luminaire only.
This luminaire is 12V extra-low voltage and can be DIY.
Do not plug this luminaire directly into 240V.
When working with 240V, a licensed electrician is required.
The Lucci wiring kit (SKU# 220826, 220827), Lucci transformer (SKU# 220818, 220819, 220829) are sold
separately.
Warranty
•
This luminaire is covered by a 3 year warranty. The warranty is from date of purchase, not the date of installation.
Please retain proof of purchase.
•
Warranty will be void if there is any damage due to improper usage or modification to the luminaire.
•
Failure to comply with the instructions in this manual may increase the risk of damage or injury and will void warranty.
Installation requirements
•
All wiring and installation of the luminaire must adhere to the latest local and national wiring rules.
eg. AS/NZS 3000 Electrical installations. If unsure, please contact a licensed electrician.
•
This luminaire is rated IP65. This must be maintained during installation.
•
Replace any cracked protective lamp shade to maintain IP rating when using this luminaire.
•
Select a suitable location for installation:
- This luminaire is protected against water penetration to IP65 standards, which is against low pressure jets of water
from all practicable directions. This must be maintained during installation.
- The wiring kit and connectors are not suitable for underground installation without protection from water or damp
conditions. It is not designed to be immersed in water.
- The installation location may require a gravel substrate to help with water drainage, to prevent the wiring kit and
connectors being submerged in water after heavy rain or from watering the garden.
- Building element and structural members can be abutted to the luminaire.
- This luminaire is rated IC4 so that it can be covered or abutted by thermal insulation.
•
Take care not to pull any electrical wires during unpacking as this may damage the connection.
•
Lay out all the components on a smooth surface and make sure there are no components missing before assembling.
If parts are missing, return the complete product to the place of purchase for inspection or replacement.
•
Check whether the luminaire has been damaged during transport. Do not operate/install any product which appears
damaged in any way. Return the complete product to the place of purchase for inspection, repair or replacement.
•
Ensure power to the circuit you are working on has been switched OFF before commencing any electrical work.
