Installation Instructions
2 |
P a g e v 1 . 0 ( 0 1 / 2 0 2 0 )
Installation directions
Turn off the main supply before installation.
1.
Remove all packaging material from the product and be careful not to throw away accessories that may be hidden
within the packaging material. (Fig.1)
2.
Cut the hole in the installation area according to the cut-out size. (Fig.2)
3.
Connect wiring to the output wire of the transformer by the quick connector. (Fig.3A)
USING LUCCI WIRING KIT AND LUCCI TRANSFORMER (both sold separately)
4.
Remove the cover from the connector on the wiring kit (SKU# 220826, 220827).
Connect the luminaire to the transformer (Fig.3B) or to wiring kit by the quick connector.
NOTE: The wiring kit is
rated for a 120VA load only.
Connect the wiring kit (SKU# 220826, 220827) to the transformer (SKU# 220818, 220819, 220829).
NOTE: The transformers are rated for 80VA, 28VA and 10VA load respectively.
Proceed to step 6.
USING OTHER WIRING AND TRANSFORMER (not included)
5.
Remove the 12V bi-pin connector from the cable for hard wiring or alternative wiring method and power supply
system. This luminaire is rated IP65, this must be maintained during wiring and installation.
Ensure that the wires are secure and no bare wires are exposed. Ensure all wiring and the transformer used are
appropriately rated and suitable for the location used.
If unsure, please contact a licensed electrician.
Proceed to step 6.
6.
Insert the luminaire into the cut-out hole. (Fig.4)
Turn the power on and enjoy your luminaire.
