Special Telephone Services
If you subscribe to special local telephone
company services like Call Waiting or Call
Forwarding, you can access them by
pressing
P
whenever you would press
the switchhook on a regular phone. This is
like the Flash feature on some other phones.
Temporary Tone
If you have dial pulse (rotary) service, this
feature allows you to enter codes or tones
needed to operate answering machines, or
use electronic banking services, calling
cards, and other special services. This
feature will operate most special services;
however, some services may actually
require a touch tone line. To be sure, ask
the company that provides the special
service.
NOTE: If you have touch tone service,
you do not need to use the Temporary Tone
feature.
1
Dial the call, then press
T
.
Any buttons pressed after this send
tone signals.
2
After you hang up, the phone
automatically returns to dial pulse
(rotary) dialing.
O P E R A T I O N
Making a Call
1
Press
P
, and wait for the
PHONE light to go on.
2
When you hear a dial tone, dial the
number.
Answering a Call
•
If the handset is in the base, lift the
handset. The PHONE light goes on,
and the call is connected.
•
If the handset is away from the base,
press
P
. The PHONE light goes
on, and the call is connected.
Ending a Call
•
If you are near the base, place the
handset in the base.
•
If you are away from the base, press
O
.
Redial
The last number dialed on this phone is
stored in redial memory until you dial
another number.
1
Press
P
, and wait for the
PHONE light to go on.
2
When you hear a dial tone, press
R
.
PHONE light
goes on while
you are on a call.
Redial last call made.
Temporary Tone
LO BATT light goes
on when battery needs
to be charged.
Answer calls and
access special
subscriber calling
services requiring
switchhook flash.
○
○
○
○
○
