Remote Port Security Device
User’s Guide
555-024-402
Issue 1
October 1996
RPSD System Administration
Page 3-52
Command Functions
3
UR—User Restrictions
Syntax and Parameters
To assign a time restriction:
ur <full_or_partial_user_id,restr_id(s)>
To clear a time restriction:
ur <full_or_partial_user_id,restr_id(s)>,clear
Description
Use the User Restrictions command to assign time restrictions to one or more
users. The command assigns time restrictions identified by the restriction ID
code to a specified user if the full user ID is given, or to all users beginning with
the character(s) that is entered. For example, if you enter
a
, the time restriction is
assigned to all user IDs beginning with the letter “a.” You can enter any number
of restriction ID codes to assign the corresponding time restriction to the user(s)
up to all restriction ID codes (14).
To check that the restrictions were assigned as desired, use the List User Table
command (see instructions on page 3-34). To check parameters of the restriction
IDs, use the List Restrictions command (see instructions on page 3-26).
Parameter
Description
ur
User Restrictions command
<full_or_
partial_user_
id
>
A unique identifier assigned to each user by the system
administrator using the Add User command. If the full user
ID is entered, the restriction is assigned to the specified user
only. If a partial user ID is entered, the time restriction is
assigned to all users beginning with the letter entered.
<restr_id>
A single character from “A” to “N” used as a code to identify
the specific time periods and days during which time
restrictions can be assigned to one or more users.
ENTER
