Remote Port Security Device
User’s Guide
555-024-402
Issue 1
October 1996
Installation
Page 2-7
Installation
2
You need the following components to install the RPSD Lock:
■
RPSD Lock
■
The central office line assigned as the RMATS channel (on customer
premises)
■
The communications system modem (on customer premises)
■
7-foot line cord with RJ11 modular connectors
■
14-foot line cord with RJ11 modular connectors
■
DB9 (male) to DB25 (female) cable
■
RS-232 cable
■
Administration terminal for the Lock
■
RPSD Lock power supply
■
AC outlet or outlet on the UPS
NOTE:
NOTE:
The 7-foot and 14-foot telephone line cords are provided with the RPSD
Lock. If additional length cords are needed, the customer must supply
them.
Connecting the RPSD Lock to the Central Office
Line
You need the following components to connect the RPSD Lock to the central
office line (see
Figure 2-2
):
■
RPSD Lock
■
Central office line assigned as the RMATS channel
■
14-foot line cord with RJ11 modular connectors