Remote Port Security Device
User’s Guide
555-024-402
Issue 1
October 1996
RPSD System Administration
Page 3-6
Command Functions
3
A—Add User
Syntax and Parameters
To add an RPSD Key user:
a <user_id>,[secret_key]
To add an administrative user with the capability to access the RPSD Lock to
change Lock parameters:
a <user_id>,[secret_key], a<authentication_mode>
Parameter
Description
a
Add User command
<user_id>
A unique identifier selected by the system administrator.
The user ID may be up to 10 characters long and is not
case sensitive.
[secret_key]
The the pre-defined number of up to 14 hexadecimal
digits used to administer a single Key for multiple Locks.
This parameter can be specified by the system
administrator or randomly assigned by the Lock. If this
field is omitted (the field must be delimited by a comma), it
is randomly generated by the Lock.
a
The administrative user designation
<authentication
_ mode>
Identifies the authentication method if AUX Security is
enabled. The valid values are:
k
= administrative user must authenticate to the
AUX port using a passkey
w
= administrative user must authenticate to the
AUX port using a password
The default is
w
. If you only enter “a,” the system internally
adds a “w.”
ENTER
ENTER
