Enter Review, Change-Insert, Validate, Screen#, or Print:
4.
Verify data is consistent with the selected work order form.
Comment:
Correct errors using terminal in the update mode.
5.
Type and enter
q
Response:
FACILITY EQUIPMENT (IFAC)
page displayed.
6.
Type and enter
<
Response:
20.0 SM PACK & SUBPACK VIEWS
page displayed.
7.
Type and enter
q
Response:
RCV-196 COMPLETED
11.14.6 Update IFACs On Other LSI
1.
If required, repeat Sections
11.14.4
and
11.14.5
for the IFACs being updated to operational on the other
LSI.
11.14.7 Perform DS1 Cross Connects
1.
Telephone Company function.
11.14.8 Insert TR303 RT Information Into Data Base
1.
At the RC/V terminal, type enter
18.15
Response:
Enter Data Base Operation
I=Insert, R=Review, U=Update, D=Delete:
2.
Type and enter
I
Response:
REMOTE TERMINAL
page displayed. Cursor at SM attribute.
3.
NOTE 1:
Verify RT vendor documentation for correct facility assignment and EOC/TMC backup
designation.
For example, the Lucent Technologies
SLC
®
Series 5 FP303G EOC/TMC backup designation must
be on RT TERM 3.
The
SLC
®
Series 2000 FP303G EOC/TMC the backup designation must be on RT TERM 2.
NOTE 2:
To improve reliability, it is recommended, but not required, that the TMC/EOC PRI and NPRI be
assigned over different protocol handlers (PH).
NOTE 3:
If different protocol handlers are assigned in Note 2 above then the ACKTIMER should be set to
the default value of 150; otherwise,
ACKTIMER should be set to 350 where the protocol handlers are the same.
Using the selected work order Form 18.15 as a guide for the facilities that are to be assigned to the TR303
235-105-210
October 1999
Copyright © 1999
Page 5
Summary of Contents for 5ESS-2000
