Where:
Y = ISLU2 number
Z = LG number (obtained from LCKEN).
3.
Check if the faulty LCKT is OOS. If not, to remove the faulty LCKT from service, type and enter
22X,Y
menu
command.
Where:
X = LBD number
Y = LCKT number
NOTE:
Camp-on occurs if the customer is using the line. Try again when the line is idle.
11.43.2 Activate Spare Line Circuit
1.
At the RC/V terminal, type and enter
4.23
.
2.
At the parameters
FAULTY OE
and
SPARE OE
enter the appropriate values.
Reference:
Recent Change Manual
3.
To insert the data, type and enter
i
Response:
inserting. . . FORM INSERTED
is displayed
4.
Return to the class menu.
5.
Verify the subscriber is in service, type and enter:
OP:STATUS,DN=
a;
Where:
a = DN of subscriber
11.43.3 Operation with Spare Connections active
NOTE:
The following should be noted when sparing connections are active.
1.
Requests to diagnose or conditionally remove the spared faulty circuit, line board, LG, the designated spare
circuit, or the MAN packs supporting the spare connection is denied.
2.
Requests to unconditionally remove any of the circuits will succeed, and the spare path is automatically taken
down. Once this happens, the faulty spare circuit cannot be restored again until the sparing data is removed
by the RC/V terminal.
3.
When a spare connection is active, diagnostics are inhibited on the entire line board associated with the faulty
circuit (including other circuits that are not faulty).
4.
To print a report of all active spare connections in an SM, type and enter:
OP:CFGSTAT,SM=
a
,SPARE;
235-105-210
October 1999
Copyright © 1999
Page 2
Summary of Contents for 5ESS-2000
