1.
Select and prepare terminal for recent change and verify (RC/V) activities.
Reference:
Procedure 11.1
2.
At the RC/V terminal, type and enter
18.15i
Response:
REMOTE TERMINAL
page displayed. Cursor at SM attribute.
3.
Obtain RT vendor documentation for correct facility assignment and EOC/TMC backup designation.
Example:
The Lucent Technologies
SLC
®
Series 5 FP303G EOC/TMC backup designation must be on RT TERM 3.
For Lucent Technologies
SLC
®
Series 2000 FP303G EOC/TMC, the backup designation must be on RT
TERM 2.
NOTE 1:
To improve reliability, it is recommended (but not required) that the
TMCPRI, EOCPRI,
TMCNPRI, and EOCNPRI
attributes be assigned over different protocol handlers (PH).
NOTE 2:
If different protocol handlers are assigned per previous Note, then the
ACKTIMER
attribute should
be set to the default value of 150; otherwise,
ACKTIMER
should be set to 350 where the protocol
handlers are the same.
4.
Using the selected work order form 18.15 for the identified DNU-S TR303 RT as a guide, type and enter the
values for each KEY attribute.
RECENT CHANGE 18.15
1. SM ___
2. UNIT TYPE _
3. UNIT NUMBER _
4. RT EX _
5.
For the
RT EQSTAT
attribute marked ``per HCP'', enter a
G
.
NOTE:
The
RTVENDOR, TMCPRI, TMCNPRI, EOCPRI, and EOCNPRI
attributes are not entered at this
time.
Response:
Enter Insert, Change, Validate, Screen#, or Print:
6.
Type and enter
i
Response:
inserting ....FORM INSERTED
REMOTE TERMINAL
page displayed.
7.
Type and enter
<
Response:
18.0 SM & REMOTE TERMINALS VIEWS
page displayed.
11.51.7 Update DS1 Facility to Operational
235-105-210
October 1999
Copyright © 1999
Page 4
Summary of Contents for 5ESS-2000
