Specifications and Safety Warnings
Safety Warnings
Beta Draft Confidential
2-6
4/5/03
CBX 500 Multiservice WAN Switch Hardware Installation Guide
2. This equipment must be connected to a protective ground in accordance with the
instructions provided in this guide. Improper grounding may result in an electrical
shock.
3. This equipment does not provide safety isolation between any port that is
connected to a digital network termination point and any other port to which
terminal equipment may be connected.
4. The icons “|” and “ ” next to the switch on the power supply represent “On” and
“Standby” respectively. In the “|” (On) mode, the power supply is fully
operational, delivering power to the system. In “ ” (Standby) mode, the power
supply is operational, but is not delivering power to the system. The only way to
completely disconnect the supply is to remove the appropriate power cord from
the back of the unit.
Warning – This unit has more than one power supply cord. To avoid electrical shock,
disconnect the appropriate power supply cord prior to servicing.
