CBX 500 Multiservice WAN Switch Hardware Installation Guide
4/5/03
5-1
Beta Draft Confidential
5
Determining the Operating Status
This chapter includes the following topics for determining the operating status:
•
Status LEDs
•
Evaluating Power Loads for a Two-Power Supply Switch
•
Connecting Power to the Switch
•
Powering Up the Switch
Before You Begin
Before you begin, verify that the following tasks (from Chapter 4) are complete:
1. Set up the switch hardware as a free-standing or rack-mounted unit (see
page 4-3
).
2. Connect cables and console terminal to the switch (see
page 4-9
and
page 4-10
).
3. Set up the Network Management Station (NMS); see
page 4-11
.
4. Connect the NMS to the switch (see
page 4-11
).
5. (Optional) Connect the external clock source inputs and outputs (see
page 4-16
).
6. (Optional) Connect the remote alarms (see
page 4-20
).
