Handset
Retainer
Removed
Rotate
to wall
mount
position
Handset
Retainer
Screw
removed
FIGURE 12 Rotating the Handset Retainer
4
Replace the handset retainer into the upper housing. If properly
inserted, the handset retainer should project into the handset well of
the upper housing (Figure 13).
Handset
Retainer
Handset
Retainer
Screw
Handset
Retainer
after
rotation
Handset
Retainer
Screw
FIGURE 13 Handset Retainer in Wall Mount Position
5
6
7
8
Replace the screw, the number card, and the number card retainer.
Plug the (D8W) modular voice terminal cord into the jack labeled
LINE on the bottom of the voice terminal.
Check to see that one end of the handset cord is attached to the
handset. If it is not, plug one end into the handset now.
Plug the other end of the handset cord into the jack on the lower right
of the voice terminal.
iss 4, cib2852-9
