Testing Your Voice Terminal
Use the test/program (T/P) switch on the left side of the voice terminal to
test the lights and ringer. After connecting the voice terminal, slide the
T/P switch away from you to the T position (Figure 15). If the voice ter-
minal is working properly, the red and green lights will flash and the set
will ring. If this does not happen, refer to the “TROUBLESHOOTING
TABLES” in your system’s Installation Guide. If the problem is not
resolved after troubleshooting your system, contact your equipment
supplier.
FIGURE 15 T/P Switch and Volume Control
Setting the Volume
The volume control switch is also located on the left side of the voice ter-
minal (Figure 15) and changes the volume of the alerting rings, speaker,
and button clicks.
●
Slide the switch away from you to increase the volume.
●
Slide the switch towards you to decrease the volume.
iss 4, cib2852-11
