Removing and Inserting Labels
REMOVING
1
Press the back of the voice terminal rail and pull the rail up
(Figure 16).
2
Insert the tip of a paper clip or similar instrument into the hole at the
top of the label strip. Pull the labels out of the voice terminal.
INSERTING
1
Press the back of the voice terminal rail and pull the rail up
(Figure 16).
2
Insert the bottom of the label into the label slot above the column of
touch-sensitive buttons (Figure 16).
3
Slide the label all the way into the slot until the appropriate label is
over the proper button.
4
Snap the voice terminal rail back into place.
Rail
(Top)
Hole
FIGURE 16 Removing and Inserting Button Labels
To order more label strips, call the toll-free number for the National Parts
Sales Center: 1-800-222-PART. The part number (Comcode) is 844-
033-809. These labels come in single sheets with three label strips for
the 5-button voice terminal and a voice terminal number card.
iss 4, cib2852-12
