6
7
8
9
10
Gently slide the stand upward so that the voice terminal tabs fit
securely in the three mounting slots on the stand. Press down on the
stand to secure the locking tab.
Thread one end of a (D8W) modular voice terminal cord between the
base of the desk stand and the bottom of the voice terminal and plug
it into the jack labeled LINE on the bottom of the voice terminal.
Check to see that one end of the handset cord is attached to the
handset. If it is not, plug one end into the handset now.
Plug the other end of the handset cord into the jack on the lower right
of the voice terminal.
Turn the voice terminal right side up and place the handset in the cra-
dle (Figure 5).
5-Button
Voice
Terminal
Desk
Support
Base
FIGURE 5 5-Button Voice Terminal Attached to the Desk Stand
11 Plug the other end of the modular voice terminal cord into the build-
ing wiring connection, which may be a modular voice terminal exten-
sion cord or a modular voice terminal jack (Figure 6).
iss 4, cib2852-4
