363-206-295
Technical Specifications
Issue 1
December 1997
10-29
CPro-2000 Graphical User Interface and
Provisioning Tool
1
0
The CPro-2000 Graphical User Interface (GUI) and Provisioning Tool is a
Microsoft
*
Windows based user interface that can optionally be used with the
DDM-2000 OC-12 Multiplexer. The tool simplifies and mechanizes administration,
maintenance, and provisioning operations. CPro-2000 supports DDM-2000 OC-3
Multiplexers, DDM-2000 OC-12 Multiplexers, and FT-2000 OC-48 Lightwave
Systems. A minimum platform configuration is:
■
486 SX
IBM
†
compatible desktop or laptop PC
■
Disk drive — one 1.44 Megabyte (3.5 inch)
■
Hard disk with at least 40 Megabytes of available space
■
8 Megabyte RAM
■
MS-DOS operating system version 5.0 or later
■
Windows version 3.1, Windows NT, or Windows 95
■
Serial port (EIA-232-D) — configured as COM1 or COM2
■
Mouse
■
VGA color monitor.
CPro-2000 has been tested with AT&T,
NCR, IBM, NEC
‡
, and
Gateway-2000
§
personal computers. For more information, see 365-576-130,
CPro-2000 User
Manual, Release 7.0. See Section 10, "Technical Specifications," for PC
requirements to use the tool.
User Panel
1
0
The user panel contains red LEDs for CR and MJ alarms, yellow LEDs for MN and
PMN alarms, and for abnormal (ABN) and near-end activity (NE-ACTY) status.
A green PWR ON LED is lighted when the shelf is receiving
−
48 V power. A green
ACO LED is lighted when the ACO function is active.
The FE SEL test, ACO/TEST, and UPD/INIT push-buttons are provided to control
system operation.
*
Microsoft is a registered trademark and Windows is a trademark of Microsoft Corporation.
†
IBM is a registered trademark of International Business Machines Corporation.
‡
NEC is a registered trademark of NEC Corporation.
§
Gateway 2000 is a trademark of Gateway 2000, Inc.