Lucent Technologies Supplemental Battery Stand J85504D-1 List 16
5 - 10 Installation Guidelines and Preparations
Issue 2 September 2000
Battery String
The batteries used in this stand may be wired in various ways to generate
the string voltage required for the plant. The following schematics show
the various wiring options for the 12IR125 and C11 batteries.
Figure 5-7: Schematic of 24V 12IR125 Battery String
Figure 5-8: Schematic of 48V 12IR125 Battery String
Figure 5-9: Schematic of 24V C11 Battery String
Thermal Probe Assembly
35 Feet - 848346847
(Connect to negative
battery post)
To 210E Control Module
or Controller Thermal Inputs
Bus Bar
(Provided with batteries)
Wire 2 (Red)
Wire 3 (Black)
Wire 4 (Red)
Wire 1 (Black)
Bat 1
Bat 4
To Disconnect
Switch
Thermal Probe Assembly
35 Feet - 848346847
(Connect to negative
battery post)
To 210E Control Module
or Controller Thermal Inputs
Wire 4 (Red)
Wire 1 (Black)
Bat 1
Bat 4
To Disconnect
Switch
Thermal Probe Assembly
35 Feet - 848346847
(Connect to negative
battery post)
To 210E Control Module
or Controller Thermal Inputs
Wire 2 (Red)
Wire 4 (Red)
Wire 1 (Black)
Wire 3 (Black)
Bus Bar - 848347256
(4 Places)
Bus Bar
(Provided with batteries)
Bat 1
Bat 6
To Disconnect
Switch
