............................................................................................................................................................
3
Insert the CTL circuit pack.
Important! Be sure that the CTL circuit pack contains a
CompactFlash
™
card with loaded NE software (as delivered from
manufacturer) and the flash card is secured by the protecting bar.
Result:
The NE automatically starts the download (takes about 20
minutes).
............................................................................................................................................................
4
Check that the ACTIVE LEDs on the circuit packs are lit up.
Important! After the first boot the red LED of the XC320 board is
still flashing. To clear that, enter the
NE Date and Time
(see Chapter
6, section
) and select
Fault
→
Enter/Exit
Maintenance Condition...
→
Exit Maintenance Condition...
from
the
System View
main menu.
Software download failure
In the case of a download failure (red LEDs are still illuminating),
please refer to Appendix A, section
.
Circuit pack installation
Mounting the circuit packs
Powering, circuit pack installation, and NE software
download
....................................................................................................................................................................................................................................
365-374-074
Issue a, April 2002
Lucent Technologies
5 - 1 7
E
N D
O F
S
T E P S
............................................................................................................................................................