............................................................................................................................................................
6
Select
1-Way Point-to-Point
in the group box
Type of
Cross-connection
.
............................................................................................................................................................
7
Click on
Next>
to proceed to the next window.
Result:
Screen 2 of 3
opens.
............................................................................................................................................................
8
Click on
Select...
. to select the source tributary.
Result:
The
Ptn Grp
selection tab appears. In the list box of the
Ptn
Grp
selection tab the system is displayed. The displays can be
expanded. Thus a tree of systems, bays, shelves, circuit packs,
and ports is depicted.
............................................................................................................................................................
9
Select one port in the list or enter the AID in the text box
Enter AID
above.
Result:
In the list box
Tributary
on the right, the AIDs of all VCs/STSs
belonging to the respective port are displayed.
............................................................................................................................................................
10
Select the VC/STS which shall be used as the source and click on the
Select...
button.
............................................................................................................................................................
11
Select the destination port in the
Ptn Grp
selection tab and the
corresponding VC/STS in the
Tributary
list box and click on the
Select...
button.
Result:
On
Screen 2 of 3
both, the source and destination tributary, are
displayed.
............................................................................................................................................................
12
Click on the
Next>
button.
Port transmission test (daisy chain test)
Stand alone test procedures
....................................................................................................................................................................................................................................
7 - 1 4
Lucent Technologies
365-374-074
Issue a, April 2002
