............................................................................................................................................................
4
Define the cross-connection rate according to the used analyser signal
in the drop-down list box
Rate
. The following values are possible:
•
VC3
•
VC4
•
VC44c
•
VC416c
•
VC464c
Please note that it is not possible to proceed to the next window
before selecting the cross-connection rate.
............................................................................................................................................................
5
Select
2 Way Point-to-Point
in the group box
Type of
Cross-connection
.
............................................................................................................................................................
6
Click on
Next>
to proceed to the next window.
Result:
Screen 2 of 3
opens.
............................................................................................................................................................
7
Click on
Select...
. to select the source tributary.
Result:
The
Ptn Grp
selection tab appears.
............................................................................................................................................................
8
Select the port to which the SDH analyser is connected.
Result:
In the list box
Tributary
on the right, the AIDs of all VCs
belonging to the respective port are displayed.
............................................................................................................................................................
9
Select the VC which shall be used as the source and click on the
Select
button.
............................................................................................................................................................
10
Select the destination port which is interface to the MS-SPRing in the
Ptn Grp
selection tab and the corresponding VC in the
Tributary
list
box.
SDH test procedures
Point to point / Ring testing
Span / Ring testing
....................................................................................................................................................................................................................................
8 - 2 4
Lucent Technologies
365-374-074
Issue a, April 2002
