MERLIN LEGEND Communications System Release 5.0
Feature Reference
555-650-110
Issue 1
June 1997
Features
Page 77
Automatic Route Selection
SMDR
SMDR reports for systems with ARS show all the digits dialed by a user in
the CALLED NUMBER field, including any absorbed (ignored) digits, and
the facility used to make the call. The reports do not include the ARS
dial-out code or any digits added by ARS.
Speed Dial
Personal Speed Dial and System Speed Dial numbers can include the
ARS code.
System Access/
Intercom Buttons
The ARS FRL assigned to the extension being used to make the call
applies to calls made on both SA and Shared SA buttons.
System
Renumbering
The ARS access code can be renumbered (factory setting is 9).
Toll Type
In certain areas, the local telephone company requires the prefix 1 for
certain exchanges. In these cases, the exchanges can be assigned to a
1 + 7 table; the 1 + 7-Dialing Requirements must be set to Within Area
Code so that people calling numbers in other exchanges do not have to
dial
1
.
