MERLIN LEGEND Communications System Release 5.0
Feature Reference
555-650-110
Issue 1
June 1997
Features
Page 441
Primary Rate Interface (PRI) and T1
Primary Rate Interface (PRI) and T1
3
0
At a Glance
3
0
Users Affected
Telephone users, operators, data users
Reports Affected
DS1 Information, PRI Information, SMDR
Modes
Key, Hybrid/PBX
Telephones
All (display support on MLX telephones only)
System Programming
Systemwide
100D Module
PRI
Specify modules that provide primary, secondary, and tertiary
clock synchronization and source of clock synchronization;
also activate/deactivate clock:
●
LinesTrunks
→
More
→
ClockSync
Specify type of facility connected to 100D module:
●
LinesTrunks
→
LS/GS/DS1
→
Type
Specify framing format for 100D module:
●
LinesTrunks
→
LS/GS/DS1
→
FrameFormat
Specify line coding for 100D module:
●
LinesTrunks
→
LS/GS/DS1
→
Suppression
Specify line compensation between 100D module and
channel service unit (CSU) or far end:
●
LinesTrunks
→
LS/GS/DS1
→
Line Comp
Specify type of CSU equipment provided by CO:
●
LinesTrunks
→
LS/GS/DS1
→
Channel Unit
Specify the type of switch (Release 4.2 and later systems):
●
LinesTrunks
→
PRI
→
SwitchType
Assign telephone numbers to PRI lines:
●
LinesTrunks
→
PRI
→
Telephone Number
Assign B-channels to group:
●
LinesTrunks
→
PRI
→
B-ChannlGrp
→
B-channels
Assign PRI lines to B-channel groups:
●
LinesTrunks
→
PRI
→
B-ChannlGrp
→
Lines
Specify type of network service for each B-channel group:
●
LinesTrunks
→
PRI
→
B-ChannlGrp
→
NetworkServ
Specify whether telephone number to send to network for
outgoing calls should be copied from line telephone number:
●
LinesTrunks
→
PRI
→
B-ChannlGrp
→
Copy Number
Specify telephone number to send to network for outgoing
calls on PRI lines:
●
LinesTrunks
→
PRI
→
NumbrToSend