MERLIN LEGEND Communications System Release 5.0
Feature Reference
555-650-110
Issue 1
June 1997
Features
Page 583
System Renumbering
System Renumbering
3
9
At a Glance
3
9
Incoming calls on a Shared SA button ring with the personalized ringing
pattern programmed for the telephone with the button (not the principal
extension).
The principal extension of Shared SA buttons can use Send Ring. This
feature overrides Delay Ring programmed for any telephones with
Shared SA buttons for the principal extension. When a call arrives for the
principal extension while it is busy, the Shared SA buttons ring
immediately.
Saved Number Dial
If Saved Number Dial is used on a Shared SA button, the number is
stored on the telephone that used the feature, not on the principal
extension.
SMDR
When a call is made from an SSA button, the SMDR report records the
extension from which the call is made, not the principal extension.
Transfer
A transferred call returns only to the telephone that originated the
transfer, whether an SA or a Shared SA button.
If a transfer originator has an SSA button for the person receiving the
transfer, the LED next to the SSA button flashes to indicate a ringing call.
However, if the transfer originator answers the call, it is disconnected.
Users Affected
Telephone users, operators, data users
Reports Affected
Automatic Route Selection, Dial Plan, Extension Directory,
Extension Information, Group Paging, Operator Information,
Remote Access (DISA) Information
Modes All
Telephones All
System Programming
Change the 2-digit numbering plan to 3-digit or Set Up Space:
●
SysRenumber
→
Default Numbering
→
2-Digit/3-Digit/Set-up Space
Renumber individual extensions or groups of extensions,
calling group extensions, Group Paging extension, pool
dial-out codes, operator park zones, Listed Directory Number
extension, remote access code, ARS access code; or assign
the range of extensions on a DSS:
●
SysRenumber
→
Single
●
SysRenumber
→
Block
Maximum
Numbering Range: 0–9950
