Specifications
Issue 1 January 1997
C-3
Modems
MERLIN LEGEND Reporter requires Hayes-compatible modems (error-correcting, 9600-
baud or faster modems are recommended). Typically, default settings work. Although
switch settings may vary, you can emulate the following standards:
Baud rate
any — controlled by MERLIN LEGEND Reporter
DTR
on — controlled by MERLIN LEGEND Reporter
DCD and DSR, “AT” command set
on
Echo Commands, Autoanswer
off — set by MERLIN LEGEND Reporter
Result codes
on — set by MERLIN LEGEND Reporter
Capacities
Call Records
To disk capacity. Each call record = 75 bytes
Sites
Single-site = 1 (model 50 or model 200)
Multi-site = 25 = (model 5000), 50 (model 10,000) or 100 (model 20,000)
Organization
2 to 5 levels. See table below for capacities by model size.
Model
Ext.
Cost Ctr.
Dept.
Div.
Branch
Facilities
Lines
Account
50
50
50
25
20
15
25
50
1,000
200
200
50
25
20
15
25
80
1,000
5,000
5,000
1,000
1,000
500
250
200
2,000
10,000
10,000
10,000
1,000
1,000
500
250
200
4,000
20,000
20,000
20,000
1,000
1,000
500
250
200
8,000
20,000
Call Types
50 entries. System defaults are:
Name
Description
Dialing Pattern
LOCAL
Local
???????
LDIST
Long distance, direct dial
1%
IDDD
International Direct Distance Dial
01%
INCOM
Incoming
ABAND
Abandonded call (incoming call, no talk-time)
OTHER
All other calls, not defined
%
Location Table
5000 entries per site
Alert Numbers
250 entries per site
Log files
1000 entries in each, the Message Log and the Immediate Output file
Scheduled
Reports
1000 individual reports; 25 groups
Dialed Digit
Processing Table
100 dialed number patterns per site
Defined automatically by
the Call Collection Interface
