Fiber Cleaning
Equipment Requirements and Recommendations
...........................................................................................................................................................................................................................................................
B - 3
Lucent Technologies - Proprietary
See notice on first page
365-372-327 R2.0
Issue 1, October 2003
............................................................................................................................................................................................................................................................
Equipment Requirements and Recommendations
Description
For proper cleaning, the following equipment and materials are
recommended:
Important!
The equipment and material listed above has been
tested and is proven effective when used in conjunction with this
procedure. Substitution of equipment or materials is at the
discretion of the user and is not recommended.
............................................................................................................................................................................
Table B-1
Required and Recommended Equipment and Materials
Product
Model/Description
Comcode
ITE #
Installation
Order #
Optical Fiber Scope
Noyes OFS 300-200X
408197028
ITE-7129
33712900
2.5mm Universal
adapter cap
For use with the Noyes
OFS 300-200X
408197044
ITE-7129D1
33712901
1.25mm Universal
adapter cap
For use with the Noyes
OFS 300-200X
408197069
ITE-7129D2
33712902
Video Fiber Scope
1
Noyes VFS-1
TBD
TBD
TBD
Individual presaturated
alcohol wipes
99% pure isopropyl
alcohol
901375147
ITE-7136
33713600
CLETOP Cleaning
Cassette
Type A Reel
901375154
ITE-7137
33713700
CLETOP Cleaning
Cassette Replacement
Reel
Type A Reel
901375014
ITE-7137 D1
33713701
Luminex Stick port
cleaners
1.25 mm
901375030
ITE-7134
33713400
Luminex Stick port
cleaners
2.5 mm
901375022
ITE-7135
33713500
Luminex Cloth
5.5” x 5.5”
408201226
R6033
23603300
Notes:
1. This equipment may not be necessary at all locations. It is to be used when the ports need to be verified
for cleanliness. If care is exercised when cleaning fibers, the video scope may not be needed.