Chapter 4 Configuring the Basic System
Configuring In-Band Management
4-30
255-700-025
PacketStar
™
Access Concentrator 60 User Guide
, Issue 1
Release 6.3.0
Note:
At the time of initial setup, the In-Band Management Table
window is empty. After you have set up routes, this window
displays all the routes of this type in the system.
9
Select the
Add a route
command and press Enter.
10
Click
Create
.
Commands
The commands on this window have the following functions:
Field Descriptions
11
Select the values for the fields in this window as described in Table 4-7.
Figure 4-19. Inband Management Route Configuration Window
Command
Function
• Reset
Resets the display.
• Add a route
Use to add the newly configured route.
• Delete a route
Use to delete a route.
• Go Back to Route Table Returns you to the In-Band Management
Route Table window.