255-700-025
4-35
PacketStar
™
Access Concentrator 60 User Guide
, Issue 1
Release 6.3.0
Chapter 4 Configuring the Basic System
Using the Equipment Configuration Window
The Equipment Configuration window is displayed (see Figure 4-22).
The Equipment Configuration window displays the following:
~
All the input/output (I/O) and server modules in the chassis
~
Each module location by slot number
~
Status of the modules (whether they are configured)
~
Alarm status (whether a loss of signal has been detected)
When a module is inserted into the chassis, its module name appears on the
window. When the module is removed from the chassis, its module name
disappears from the window. The fields displayed on the Equipment
Configuration window are described in Table 4-9.
Figure 4-22. Sample Equipment Configuration Window (As Displayed on the
PSAX 20 or AC 60 Systems)
Table 4-9. Field Values for the Equipment Configuration Window
Field
Description
Slot
Indicates the slot number location on the AC 60 chassis.
You can configure only user-selectable I/O and server
modules, and the Stratum 3–4 clock timing.
Card Type
Indicates what kind of module is inserted in the slot.
Status
Indicates that the module operates in primary mode.
This field applies to the I/O and server modules.
Alarm Status
Indicates whether any alarms are active. The
Alarm
Status
fields are described in more detail in Table 4-12
on page 4-40.