255-700-025
4-47
PacketStar
™
Access Concentrator 60 User Guide
, Issue 1
Release 6.3.0
Chapter 4 Configuring the Basic System
PNNI System-Wide Configuration
Node Lowest
True (default),
False
Specifies the root node (true if the
current node is root).
Select
True
for this field.
Note:
It is recommended that you
use the default value of
True
, because parent node
and multiple node
configuration are not
currently supported.
Res. Transit
(display only)
False (default),
True
Restricted transit indicates whether the
node is restricted to not allowing
support of SVCs transitting this node.
[Complex
Node]
(display only)
True, False
Specifies whether this node uses the
complex node representation. This
attribute determines the setting of the
nodal representation bit in the nodal
information group originated by this
node.
True
indicates that the complex node
representation is used.
False
indicates that the simple node
representation is used.
[Res Branching]
(display only)
True, False
Indicates whether the node is able to
support additional point-to-multipoint
branches. This attribute reflects the
setting of the restricted branching bit in
the nodal information group originated
by this node.
True
indicates that additional branches
cannot be supported.
False
indicates that additional
branches can be supported.
[DB Overload]
(display only)
True, False
Specifies whether the node is currently
operating in a topology database
overload state. This attribute has the
same value as the non-transit for PGL
election bit in the nodal information
group originated by this node.
[No of Ptses]
(display only)
0 (default)
Displays the total number of PTSEs
currently in the topology database(s)
for this node.
Table 4-13. Field Values for the PNNI Node Configuration Window
Field Name
Values
Description