Chapter 4 Configuring the Basic System
PNNI System-Wide Configuration
4-68
255-700-025
PacketStar
™
Access Concentrator 60 User Guide
, Issue 1
Release 6.3.0
[Remote Port
Id]
(display only)
(Numerical
data)
Indicates the port identifier of the port
at the remote end of the link as assigned
by the remote node.
If "outsideLinkAndUplink" is displayed
in the
Link Type
field, this is the port
identifier assigned by the lowest-level
neighbor node to identify the outside
link.
If "unknown" is displayed in this field,
or if "uplink" is displayed in the
Link
Type
field, the remote port ID is set to
zero.
[Derived Agg.
Token]
(display only)
(Numerical
data)
A PNNI aggregation token - this is used
to determine which links to a given
neighbor node are to be aggregated and
advertised as a single logical link.
[Upnode Id]
(display only)
(Numerical
data)
For outside links and uplinks, this
attribute contains the Node Identifier of
the upnode (the neighbor node's
identity at the level of the common peer
group). When the upnode has not yet
been identified, this attribute is set to
zero.
For horizontal links or when the link
type is not yet known, this attribute is
set to zero.
[Upnode ATM
Address]
(display only)
(Numerical
data)
For outside links and uplinks, this
attribute contains the ATM end system
address used to establish connections to
the upnode. When the upnode has not
yet been identified, this attribute is set
to zero.
For horizontal links or when the link
type is not yet known, this attribute is
set to zero.
Table 4-18. Field Values for the PNNI Link Configuration Window
Field Name
Values
Description