255-700-025
4-81
PacketStar
™
Access Concentrator 60 User Guide
, Issue 1
Release 6.3.0
Chapter 4 Configuring the Basic System
Configuring Call Control Resource Allocation
4
To apply the values you have entered, select the
Apply Configuration
command and press Enter.
Once you modify a configuration and click
Apply
, the changes are
temporarily stored in the CPU module in the PSAX device. To store them
permanently, save changes selecting
Device > Save PSAX Configuration
from the
AQueView™
Menu Bar.
sgApiPointTo
PointSvcCalls
Default: 000000 The total number of point-to-point SVC
calls for Connection Gateway API to be
supported by the PSAX system.
sgApiPointTo
MultiPointSvc
Calls
Default: 000000 The total number of point-to-
multipoint SVC calls for Connection
Gateway API to be supported by the
PSAX system.
sgApiPointTo
MultiPoint
Parties
Default: 000000 The total number of parties for
Connection GatewayConnection
Gateway API to be supported by the
PSAX system.
[callContrlRes
AllocUsage %]
(display only)
100 or less
The percentage of the current usage of
the total call control resource memory
allocated by the system to be supported
by the PSAX system.
cgSvcCut
ThroughOption
Default:
cgSvcAcImplicit
CutThrough
Note:
The value in this field is
not used if you do not
have the Connection
Gateway API feature
enabled.
The PSAX system sends a message to
the connection manager to make a
connection.
cgSvcAcExplicit
CutThrough
Note:
The value in this field is
not used if you do not
have the Connection
Gateway API feature
enabled.
The Connection Gateway device
determines when to send a cut-
through message to the connection
manager.
Table 4-21. Field Values for the Call Control Resource Allocation Configuration
Window
Field Name
Values
Description