Chapter 5 Using System Diagnostics
Operations Administration and Maintenance (OAM)
5-28
255-700-025
PacketStar
™
Access Concentrator 60 User Guide
, Issue 1
Release 6.3.0
Commands
The commands on this window have the following functions:
Field Desciptions
3
Select the values from the fields on this window from Table 5-6.
Figure 5-13. OAM Loopback Test Window
Command
Function
• Continuous Update
Continuously updates the fields in the
Statistics
panel every two seconds.
Select this command and press Enter to
turn the continuous updating on and off
as needed (similar to a toggle switch).
Note:
The test display update does
not always keep pace with the
actual Access Concentrator
device operation. Use this
command to avoid
misinterpretation of test
results.
• Reset Counters
Sets the values in the
Statistics
panel
to the last saved (applied) set of values.
• Apply Configuration
Applies the values you enter in the this
window.
• Send Loopback Cell
Sends the loopback cells.
• Go Back to Diagnostics
Menu
→
Redisplays the Diagnostics Menu window
(see Figure 5-2).