Appendix A SNMP Trap Messages
Definitions of MIB Objects Used for Traps
A-54
255-700-025
PacketStar
™
Access Concentrator 60 User Guide
, Issue 1
Release 6.3.0
ipAtmAppPvcVccIfB
Interface index for side B, the ATM side, of an in-band management
ATM connection. Number value is interpreted as an interface of the
form, SSPPCCC, where SS is the module slot, PP is the port number, and
CCC is the channel number.
ipAtmAppPvcVccSubnet
MaskA
The subnet mask of the destination IP address. Value is an IP address.
ipAtmAppPvcVccVciB
VCI value for side B, the ATM side, of an in-band management-to-ATM
connection. Valid range is a number between 0 and 65535.
ipAtmAppPvcVccVpiB
VPI value for side B, the ATM side, of an in-band management-to-ATM
connection. Valid range is a number between 0 and 4095.
ipIntfStatus
Return codes for the Route Server module’s IP interface operations.
Valid range is a number between 1 and 16. See table below for a
mapping between numbers and their enumerated type.
ipTypeReasonCode
Indicator of which ip address had the problem. Valid range is a number
between 1 and 31. See table below for a mapping between numbers and
their enumerated type.
Table A-15. IP Interface Status Codes
Number Value
Enumerated Type
1
intOK
2
intIntFailure
3
intTooMany
4
intBadSlot
5
intBadId
6
intBadState
7
intBadTimer
8
intExists
9
intCantFind
10
intDelInProgress
11
intLockedIdle
12
intBadNetMask
13
intShutting
14
intDisabled
15
intNotHostAddr
16
intBadIpAddr