Appendix A SNMP Trap Messages
Definitions of MIB Objects Used for Traps
A-58
255-700-025
PacketStar
™
Access Concentrator 60 User Guide
, Issue 1
Release 6.3.0
~
The following bit map table shows line statuses for the Ethernet
module:
~
The following bit map table shows line statuses for the OC-3c and
STM-1 modules:
~
The following bit map table shows line statuses for the Voice 2-Wire
Office (2W Sink) module:
Table A-21. Ethernet Line Status Codes
Bit Value
Line Status
1
Down
2
10baseT-FullDuplex
4
10baseT-HalfDuplex
8
100baseT-FullDuplex
16
100baseT-HalfDuplex
Table A-22. OC-3c and ST M-1 Modules Line Status Codes
Bit Value
Alarm
Description
1
oc3NoAlarm
No alarm present
2
oc3RcvRAIFailure
Receiving Yellow/Remote
Alarm Indication
4
oc3XmitRAIAlarm
Transmitting Yellow/Remote
Alarm Indication
8
oc3RcvAIS
Receiving AIS failure state
16
oc3XmitAIS
Transmitting AIS failure
statue
32
oc3LOF
Receiving LOF failure state
64
oc3LOS
Receiving LOS failure state
128
oc3LoopbackState
Looping the received signal
256
oc3RcvTestCode
Receiving a Test Pattern
512
oc3OtherFailure
Any other line status not
shown in this table
Table A-23. Voice 2-Wire Office Module Line Status Codes
Bit Value
Alarm
Description
1
NoAlarm
No alarm present
2
SignalingFailureState
Signals Failure State
4
FacilityLoopBack
Not currently supported
8
Maintenance
Maintenance
16
Out Of Service
Out of Service
32
OtherFailure
Any other line status not
shown in this table