Chapter 4 Configuring the Basic System
Configuring In-Band Management
4-28
255-700-019
PacketStar
™
PSAX 20 Access Concentrator User Guide
, Issue 1
Release 6.3.0
6
Select the
Apply Configuration
command and press Enter.
7
Select the
In-Band Mgmt Route Table
command and press Enter
.
The Inband Management Route Table window is displayed (see
Figure 4-18).
Commands
The commands on this window have the following functions:
8
Select the
Add a new route
command and press Enter.
Backup ARP
ATM Address
Enter the address of the backup ATM
ARP server. (Use Solaris workstation
address.)
Backup ATM
Address Type
Default: Nsap
E164,
E164nsap
Select the ATM address type of the
backup ARP server.
Figure 4-18. Inband Management Route Table Window
Table 4-6. Field Values for the In-Band Management Configuration Window
Field Name
Values
Description
Command
Function
• Add a new route
→
Use to add a new route.
• Go Back to In-Band
Config. Screen
→
Returns you to the In-Band Management-
Configuration window.
Summary of Contents for PacketStar PSAX 20
Page 399: ......
