255-700-019
A-63
PacketStar
™
PSAX 20 Access Concentrator User Guide
, Issue 1
Release 6.3.0
Appendix A SNMP Trap Messages
Definitions of MIB Objects Used for Traps
portFailureReasonCode
Identification of cause for failure in changing the parameters of a port.
Valid range is either the number 1 or 2. See table below for a mapping
between numbers and their enumerated type.
portId
Port ID used for identification in traps. Number value is interpreted as a
port of the form, SSPP, where SS is the module slot and PP is the port
number.
powerSupplyReason
Code
Identification for change in status of a power supply. Valid range is a
number between 1 and 8. See table below for a mapping between
numbers and their enumerated type.
primarySoftware
Version
Software version running on primary CPU.
pvcFailureReasonCode
An identified reason why an ATM PVC connection request failed. Valid
range is a number between 1 and 218. See table below for a mapping
between numbers and their enumerated type.
Table A-33. Port Failure Reason Codes
Number Value
Enumerated Type
1
insufficientModuleBandwidth
2
localLoopNotAllowedWhenInAPS
Table A-34. Power Supply Reason Codes
Number Value
Enumerated Type
1
overload
2
overloadCleared
3
plus5vFailed
4
plus5vCleared
5
plus120vFailed
6
plus120vCleared
7
minus48vFailed
8
minus48vCleared
Table A-35. PVC Failure Reason Codes
Number Value
Enumerated Type
1
vpiVciUnavailableA2B
2
vpiVciUnavailableB2A
3
bandwidthUnavailableA2B
4
bandwidthUnavailableB2A
5
qosUnavailableA2B
6
qosUnavailableB2A
7
internalResourceUnavailable
8
cantUseSignalingChnlIgrsA2B
Summary of Contents for PacketStar PSAX 20
Page 399: ......
