PARTNER MAIL Administration
1.
2.
3.
4.
5.
6.
7.
Access the Voice Mail Activity menu as described in an earlier section.
Your name plays, followed by the Voice Mail Activity Menu. The Outcalling
menu item only plays if the mailbox is administered for Outcalling.
Press [
6
] to administer outcalling.
The Outcalling Administration Menu plays.
Select an option .
— Press [
1
] to change your Outcalling number.
Go to step 4.
— Press [
3
] to play the instructions for Outcalling.
— Press [
9
] to turn outcalling ON.
— Press [
6
] to turn outcalling OFF.
Press [
1
] to change your Outcalling number.
The prompt says, enter new Outcalling number.
Choose:
— If specifying a standard telephone number:
■
■
■
■
■
■
■
■
Begin the number string with [
9
] [
✱
].
Enter digits ([
0
] through [
9
]) required to reach the remote
telephone.
Press [
#
] at the end of the telephone number.
Example: To specify 276-1111 (area code 444) you enter:
[
9
][
✱
][
4
][
4
][
4
][
2
][
7
][
6
][
1
][
1
][
1
][
1
][
#
]
— If specifying a beeper number:
Begin the number string with [
9
] [
✱
].
Enter [
#
] [
#
] to begin the number. This causes the system to
automatically enter [
#
] at the end of the number.
Enter all digits ([
0
] through [
9
]) required to reach the beeper or
pager.
If you must specify a pause in the number, use a [
✱
] to indicate
each 1.5 second pause.
Press [
#
] at the end of the beeper or pager number.
Example: To specify a beeper number 123-1234 which must be
followed by 432 [
#
] after a three second pause, enter:
[
9
][
✱
][
#
][
#
][
1
][
2
][
3
][
1
][
2
][
3
][
4
][
✱
][
✱
][
4
][
3
][
2
][
#
]
Press [
9
] to turn Outcalling ON.
Press [
✱
] [
#
] to go to the previous menu.
6-60
Voice Mail Service
