Important Safety Instructions
Always follow these basic safety precautions when using the system:
1.
2.
3.
4.
5.
6.
Read and understand all instructions.
Follow all warnings and instructions marked on the product.
Never spill liquid on the product or drop objects into the ventilation slots and
openings. Doing so may result in serious damage to the components.
Repair or service must be performed by a qualified repair person.
The product is provided with a three-wire grounding type plug. This is a
safety feature. DO NOT defeat the safety purpose of the grounding type plug.
DO NOT staple or otherwise attach the AC power supply cord to building
surfaces.
DO NOT use the product near water or in a wet or damp place (such as a wet
basement).
CAUTION:
DO NOT block or cover the ventilation slots and openings. They prevent the
product from overheating. DO NOT place the product in a separate enclosure
unless proper ventilation is provided.
Additional Safety Instructions
for Installation Personnel
1.
2.
3.
4.
5.
DO NOT install telephone wiring during a lightning storm.
DO NOT install telephone jacks in a wet location unless the jack is specifically
designed for wet locations.
Never touch uninsulated telephone wires or terminals, unless the telephone
line has been disconnected at the network interface.
Use caution when installing or modifying telephone lines.
The system carriers must be securely wall mounted.
CAUTION:
If any wiring from the extension jacks leaves the building premises, you must
install AT&T IROB protectors (see “Requirements for Out-of-Building
Extensions” on page 21).
CAUTION:
Use only AT&T - manufactured PARTNER modules in the PARTNER II
Communications System.
