PARTNER MAIL Administration
Changing the Class of Service
Each Mailbox is assigned a Class of Service that specifies the type of transfer,
outcalling permission, and the total time in minutes available for messages. When
you change the current assignment, be sure to update Form 1: Voice Mail
Assignments with the new class of service. Then do the following:
1.
2.
3.
4.
5.
6.
7.
Access the Administration Main Menu as described in an earlier section.
The system plays the system programming options.
Press [
4
] for Mailbox programming.
The Mailbox Administration Menu plays.
Press [
6
] to modify a Mailbox.
The system prompts you to enter a mailbox number.
Enter the MAILBOX (extension) to be modified followed by [
#
].
The system prompts you to press [
1
] to change the name, press [
2
] to change
the Class of Service, or Press [
3
] to initialize a password.
Press [
2
] to change the Class of Service.
The system prompts you to enter the Class of Service.
Enter the new COS Class (see key below), followed by [
#
].
Class of Service Key
Class
Mins
Transfer Type
Outcalling
1
5
Permitted
Not Permitted
2
✔
10
Permitted
Not Permitted
3
15
Permitted
Not Permitted
4
5
Permitted
Permitted
5
10
Permitted
Permitted
6
15
Permitted
Permitted
7
15
Not Permitted
Not Permitted
8
15
Not Permitted
Permitted
9
60
Not Permitted
Not Permitted
Press [
✱
] [
#
] to return to the Mailbox Administration Menu.
The Mailbox Administration Menu plays.
6-40
Changing Mailbox Assignments
