PARTNER II System Programming
Programming Voice Mailbox (F14)
The Voice Mailbox Transfer feature enables the System Operator, or any system
user, to transfer calls directly to the called party’s mailbox, without ringing the
extension. If, for example, a caller wants to talk to a subscriber who is on vacation,
the receptionist can transfer the call to the subscriber's mailbox by pressing the
Voice Mailbox button followed by the called party’s extension. PARTNER MAIL would
answer the call using the called party’s greeting (if he or she recorded a greeting),
and the caller could then leave a message for the called party.
1.
2.
3.
4.
5.
6.
Locate the “VMBox” label on PARTNER II Form C (the button programming
template).
Press
[
Feature
]
[
0
] [
0
]
[
System Program
] [
System Program
] [
Central Tel Program
].
Enter the EXTENSION of the system telephone being programmed.
Press a programmable button.
Press
[
Feature
]
[
1
] [
4
].
Program another button for this extension or press
[
Feature
]
[
0
] [
0
] to exit
programming mode.
Programming Auto Dial into PARTNER MAIL
To provide one-touch dialing into PARTNER MAIL, program an Auto Dial button for
all subscribers either at the subscribers’ system telephones or through Centralized
Telephone Programming.
1.
2.
3.
4.
5.
6.
Locate the “VMS” label on PARTNER II Form C (the button programming
template).
Press
[
Feature
]
[
0
] [
0
]
[
System Program
] [
System Program
] [
Central Tel Program
].
Enter the EXTENSION of the system telephone being programmed.
Press a programmable button.
Press
[
Intercom
]
[
7
] [
7
] [
7
] (the Partner Mail Hunt Group).
Program another button for this extension or press
[
Feature
]
[
0
] [
0
] to exit
programming mode.
3-14
Telephone Button Programming
