PARTNER MAIL - Initial Programming
Assigning a General Mailbox Owner
If the Dial 0 / Timeout Options are set for the General Mailbox, the system transfers
callers to the General Mailbox extension if they enter [
0
] or take no action.
■
■
■
■
1.
2.
3.
4.
5.
Use Form 2: System Parameters to determine the General Mailbox Owner’s
extension.
Factory Settings:
— Extension: 10
— Mailbox number: 9999 (Cannot be changed)
— Password: 1234.
The General Mailbox owner must log in as mailbox 9999 to retrieve messages
from the GeneraI Mailbox and to change the General Mailbox Owner’s
password.
To change the General Mailbox password, perform the following:
— Log on using mailbox 9999.
— Use the same procedure as shown for “Changing the System
Administrator Password”.
Access the Administration Main Menu as described in an earlier section.
The system plays the system programming options.
Press [
1
] to program System Parameters.
Press [
6
] to program the General Mailbox.
The current extension plays.
Choose:
To change the General Mailbox Owner’s extension: Enter the new
—
EXTENSION followed by [
#
].
The new extension is confirmed.
— To keep the factory setting of 10: press [
#
].
Press [
✱
] [
#
] to return to the Administration Main Menu.
Programming System Parameters
4-11
