4
Switch Interface Administration
Digital Interfaces
UCS 1000 R4.2 Administration 585-313-507
Issue 3 April 2000 184
2
Enter the circuit card number in the
Card Number:
field, or press
F 2
(Choices) to select from a menu. Initially, all fields are populated with the
default values for the circuit card number entered.
3
Change any of the parameters as described in
Assigning an ISDN-PRI
Layer 1 to Digital Circuit Cards on page 175
.
4
Press
F 3
(Save).
The system changes the specified parameters for the selected circuit
card.
Displaying ISDN-
PRI Layer 1
Parameters
The circuit card must first be assigned to the ISDN-PRI Layer 1 protocol to
use this procedure. See
Assigning an ISDN-PRI Layer 1 to Digital Circuit
Cards on page 175
for more information about making the initial assignment.
To display the ISDN-PRI Layer 1 parameters:
1
Start at the ISDN-PRI Layer 1 menu (
Figure 98 on page 175
) and select:
> Display Parameters
